The Exceed Grip is the latest device from Joyetech and a very interesting pod system/AIO/Pod mod, whatever you want to call it as it's different to anything i have used before. The device has a removable 510 drip tip and the pods/cartridges slot into the device from the side so no issues with seeing the juice level. The kit includes both a cartridge where you can replace the coils and a cartridge that is disposable which house's an integrated 0.8ohm Mesh coil, there is also a cartridge which has an integrated Ceramic coil (not included). The EX series of coils fit the cartridge where you can replace the coils and you get supplied with 2 EX-M 0.4ohm coils. Both the EX-M coils and integrated 0.8ohm mesh coil make use of the Dry Burn Protection the Exceed Grip offers. The device outputs voltage intelligently dependant on the coil used and is a low power device with a max wattage of 20W. The device comes in both plain colours and colourful designs with different designs on each panel, so i will stop my rabbiting and crack on!
The Exceed Grip came in cardboard packaging with sleeve and i received the Blue version which has plain Blue panels both sides. Their are 3 plain colours available which have textured grooves on the panels which are Blue, Black and white, also their are 3 versions that take advantage of IML technology which have different colourful designs either side. The device is box shaped once the pod/cartridge is fitted but very small making it portable and comfortable to use. The chassis of the device i believe is Aluminium and the device is light even with a cartridge full of juice inserted. The spine of the device has a rectangular cutout section for the cartridge to fit and up top above where the cartridge is fitted is a delrin 510 drip tip which can be removed and is a standard fitting so you can use one of your own if you prefer. On the face of the device towards the top we have a protruding rectangular fire button then towards the bottom an LED strip for indication followed by the micro USB port. The base of the device has safety marks stamped into the metal, the Exceed Grip is a well put together device.
The replaceable coil cartridge will house any of the EX range of coils but in this kit you are supplied with 2 EX-M 0.4ohm coil heads to take advantage of the Dry burn protection technology. At the top of the pod we see the air pipe opening with a rubber lining at the top. On one side towards the bottom we have the usual bung that lifts up but stays attached to the cartridge, when lifted up a well above average sized fill port is revealed. The base of the cartridge has a metal plate with central airflow hole surrounded by the Gold plated positive circle, this circle has an insulator surround with the rest of the plate being the negative. This base plate locks into position and to remove you need to first twist it round and then pull and it becomes detached along with the coil if one was fitted. The coil just screws onto the base plate much the same as a coil screws into the base of a standard tank. To fit back on the cartridge just push back in with the base plate at an angle then twist to lock in position, the standard version of this cartridge holds 4.5ml of e-liquid.
The included Pod cartridge has an integrated 0.8ohm mesh coil to utilise the Dry burn Protection technology but also available is a pod cartridge housing a Ceramic coil. The Pod cartridge looks very similar to the standard cartridge with the same air pipe opening at the top and removable bung on one side. Inside the pod cartridge there is more plastic towards the bottom and thicker air pipe both of which reduces the capacity of the standard version of this cartridge to 3.5ml of e-liquid. The real difference is at the base on the pod cartridge, instead of the removable base plate the bottom of the pod cartridge looks much more like a standard pod with 2 contacts and you can also see where the air will get in the pod which will be less than on the standard cartridge.
Parameters:
Size: 40* 21* 74mm
Battery: 1000mah built-in battery
Max output: 20W
Output Mode: variable voltage output
Pod: 4.5ml/3.5ml
Resistance: EX-M 0.4ohm coil for standard Cartridge(pre-installed)
0.8ohm integrated Mesh coil for pod cartridge
Features:
Dual colorful panels, dust/moisture/scratches resistance
Innovative Dry Burn Protection Technology
Power indicator light: white 20%-100%, red 0-19%
Standard Cartridge best for DTL vaping, Pod Cartridge best for MTL vaping
Timeout protection
Over-charging protection
Short-circuit protection
Over-discharging protection
Packages:
1* EXCEED Grip Battery
1* Standard Cartridge (4.5ml)(EX-M Coil Pre-installed)
1* Pod Cartridge (3.5ml)
1* EX-M 0.4ohm Mesh Coil
1* USB Cable
1* User Manual
1* Warranty Card
Comments
Post a Comment